We Think
Green!
 
888-987-6838
 
 
Are you searching for a secondary containment solution that combines cost effectiveness with superior design and materials?

Eco Environmental Group offers a 100% HDPE solution without the corrosion or point of failure issues of the galvanized-liner design, or the expense of spray-in solutions.  

Our simple half-radius, double-walled exterior ribbed side wall, with a minimum 40 mil textured base liner, is supported by a sleeve-post-pier support assembly.  Our systems offer peace of mind.

Our systems are 100% weld-up, and utilizes common material, while exceeding the requirements of CFR 40 part 112.  

We use stringent quality control measures during the manufacturing and assembling process of our systems. 

By design, our system is impervious to weather related deterioration.  
Our sidewall assembly has superior load-bearing capacity at maximum fill.  
Our base liner does not require top fill to maintain its placement.  
Expansion or modification of our system is simple and timely.  
Relocation of our system is easy and available at a fraction of the cost of the system.  
Available in 25, 35, and 54 inch heights. 

Our HDPE materials meet the specifications of AASHTO M-252 OR M-294 requiring virgin compounds be used for the manufacturing process.  However, the specifications do permit reclaimed material excesses resulting from the manufacturing process.  This excess is virgin material wasted during start-up or trimmed from the product.  Thus, the properties of the resin meet the requirements for the virgin material. 

Call about our applications any time for volume and space requirements.  Average installation time for most applications is one day.

Are you searching for a secondary containment solution that combines cost effectiveness with superior design and materials?


Eco Environmental Group offers a 100% HDPE solution without the corrosion or point of failure issues of the galvanized-liner design, or the expense of spray-in solutions. 


Our simple half-radius, double-walled exterior ribbed side wall, with a minimum 40 mil textured base liner, is supported by a sleeve-post-pier support assembly.  Our systems offer peace of mind.


Our systems are 100% weld-up, and utilizes common material, while exceeding the requirements of CFR 40 part 112. 


We use stringent quality control measures during the manufacturing and assembling process of our systems.


  1. By design, our system is impervious to weather related deterioration. 

  2. Our sidewall assembly has superior load-bearing capacity at maximum fill. 

  3. Our base liner does not require top fill to maintain its placement. 

  4. Expansion or modification of our system is simple and timely. 

  5. Relocation of our system is easy and available at a fraction of the cost of the system. 

  6. Available in 25, 35, and 54 inch heights.


Our HDPE materials meet the specifications of AASHTO M-252 OR M-294 requiring virgin compounds be used for the manufacturing process.  However, the specifications do permit reclaimed material excesses resulting from the manufacturing process.  This excess is virgin material wasted during start-up or trimmed from the product.  Thus, the properties of the resin meet the requirements for the virgin material.


Call about our applications any time for volume and space requirements.  Average installation time for most applications is one day.

 
GreenNews
EcoProducts

The Erosion EEL holding back silt from 6” of rain within 24 hours on an Energy Company Location Site.